Filter
Top Products
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\04SET.FM
masterpage:Left
49Registering Local Information
On: Always conducts a multipoint
videoconference.
Broadcast Mode
Allows you to select the broadcast mode.
Split: Displays the video from the connected
terminals in split windows.
Voice Activate: Detects the terminal where
the speaker has the loudest voice, and
sends the video from this terminal to all
other terminals.
Split
Allows you to select the type of split display
used to display local and remote video on a
single monitor during a multipoint
videoconference.
Automatic: When there are up to three
terminals, the display is automatically
split into four. When there are four or
five terminals, the display is
automatically split into six.
Six-screen Mosaic: The display is split into
six, regardless of the number of
terminals.
Sender Screen
Allows you to select the monitor display of
transmitting monitors during multipoint
videoconference.
Full Screen:Display the entire screen.
Automatic: When there are up to three
terminals, the display is automatically
split into four. When there are four or
five terminals, the display is
automatically split into six.
Six-screen Mosaic: The display is split into
six, regardless of the number of
terminals.
The Status menu shows the current status of
communication.
The ISDN Line Status, LAN Line Status or
LAN Connection Status will also be
displayed depending on the line interface
used.
Communication Status
One page for each point connected to the
system will be displayed. The connected
point is shown at the upper right corner of
the page as “Connection A (or B, C....)”.
The terminal’s name of the point is also
displayed at its side.
The items below are shown both in the
columns for “Encode” and “Decode”. The
descriptions under “Encode” show the setting
status of the local system and those under
“Decode” show the status of the receiving.
Page 1/2
Audio Mode
Displays the current audio encoding format.
Video Mode
Displays the current video encoding format.
The audio encoding and video encoding
formats used for communication with a remote
party may differ from the settings in this menu,
depending on the status of videoconferencing
system on the remote site.
Frame Rate
Displays the maximum frame rate of motion
pictures.
Status Menu
Note
Status
Cancel
Page: 1/2
(Encode) (Decode)
Audio Mode
G.728 G.728
Video Mode
H.261 CIF H.261 CIF
Frame Rate
15fps 15fps
LSD Rate
6400
MLP Rate
Off
HMLP Rate
62.4K