Filter
Top Products
26 Preparing the System
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\03OVR.FM
masterpage:Left
If you use a Sony TV, insert the IR repeater under the remote sensor of the TV.
Once you set the IR repeater, the TV will turn on or go to standby together with
the Communication Terminal when you press the
@/1 button on the supplied
Remote Commander.
If the TV monitor is not turned on by pressing the @/1 button on the Remote
Commander, change the “IR Repeater Mode” setting in the General Setup menu.
For details on the “IR Repeater Mode” setting, see “General Setup Menu” on
page 53.
Turning On/Off the TV Monitor Together With the Communication
Terminal
Note
TERMINAL VISCA OUT
(MIXED)
AUX
AUX
MONITOR
LINE
AUX CONTROL
MCU VIDEO OUT
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
MAIN
EC-MIC
CTRL-S
RGB OUT
IR OUT
12
1234
12
12
12
5
DC 19.5V
CAMERA
WHITE
BOARD
1
(PLUG IN POWER)
to IR OUT
IR repeater (supplied)
Remote sensor
TV monitor