194 Location and Function of Parts and Controls
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\10OTH.FM
masterpage:Left
g MAIN CAMERA connector
Connect to the TERMINAL connector
on the rear of the Camera.
h MAIN AUX IN connector (mini
DIN 4-pin)
Connect to the video output of external
video equipment.
i SUB CAMERA connector
Connect to the TERMINAL connector
on the rear of the secondary camera.
j SUB AUX IN jack (mini DIN 7-pin)
Connect to the video output of external
video equipment.
k DC 19.5V jack
Connect the supplied PCS-AC19V6 AC
power adaptor.
l IR OUT 1/2 jacks
Connect the supplied IR repeater.
Connect the IR repeater for the monitor
connected to the VIDEO OUT
MONITOR MAIN connector to the IR
OUT 1 jack, and the IR repeater for the
monitor connected to the VIDEO OUT
MONITOR SUB connector to the IR
OUT 2 jack.
m AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
n CTRL-S jack (minijack)
Connect to the optional Remote
Commander Signal Receptor.
The remote sensor of the Camera Unit
does not operate when this connector is
in use.
o U (ground) terminal
Connect a ground wire.
p VIDEO OUT AUX jack (phono
jack)
Connect to the video input of the TV
monitor or VCR.
q VIDEO OUT MONITOR 1
connector (mini DIN 4-pin)
Connect to the S-video input on the TV
monitor or VCR.
r VIDEO OUT MONITOR 2
connector (mini DIN 4-pin)
Connect to the S-video input on the
second TV monitor when the system
uses the dual monitor mode.
s EC-MIC jacks (1, 2)
For future expansion. Not used.
t RGB OUT connector (D-sub 15-
pin)
Connect to the RGB input of the
optional projector or display unit.
u WHITE BOARD connector
Connect to the optional mimio Xi.
v 100BASE-TX/10BASE-T connector
(8-pin modular)
Used to conduct a conference via a
LAN. Connect to a hub using the
category 5 cable.
w DSB connector (D-sub 15-pin)
Connect to the TERMINAL connector
on the optional PCSA-DSB1S Data
Solution Box.
x ISDN UNIT connector
Connect to the TERMINAL connector
on the optional ISDN Unit such as
PCSA-B384S, PCSA-B768S and
PCSA-PRI.