Filter
Top Products
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\03OVR.FM
masterpage:Left
35Setting Up the System for the First Time — Initial Setup Wizard
9 Enter the sub-addresses.
Only numbers are available for a sub-
address.
When you use one ISDN line, enter the
same number both in the A1 and A2 text
boxes (except for the USA and Canada).
When you use the PCSA-B384S ISDN
unit and connect 2 or 3 ISDN lines, enter
the sub-addresses in the B1 to C2 text
boxes in addition to the A1 and A2 boxes.
When you use the PCSA-B768S and
connect 2 to 6 ISDN lines, enter the sub-
addresses in the B1 to F2 text boxes in
addition to the A1 and A2 boxes. To open
the menu with these text boxes, select
“Next”, then press the PUSH ENTER
button.
When you use the PCSA-PRI, Ch1 to Ch23
(T1), or Ch1 to Ch30 (E1) are displayed.
Enter the telephone numbers according to
the number of channels you will use.
10
Use the V, v, B or b button to select
“Next”, then press the PUSH ENTER
button.
The message window for confirmation
appears.
11
Set the following items on the LAN.
DHCP Mode
Sets the DHCP (Dynamic Host
Configuration Protocol).
Auto: Automatically assigns your IP
address, network mask, gateway
address and DNS address.
Off: Deactivates DHCP. In this case set
your IP address, network mask,
gateway address and DNS address
manually.
Host Name
Enter your host name.
IP Address
Enter your IP address.
Network Mask
Enter your network mask.
Gateway Address
Enter your default gateway address.
DNS Address
Enter your DNS (Domain Name
System) server address.
When you set “DHCP Mode” to “Auto”,
the assigned IP address is shown in the
launcher menu (page 75) or Information
menu (page 67).
If you do not know how to set up the LAN
configuration, contact your network
administrator.
Note
Sub Address
A2:
A1:
B1:
B2:
C1:
C2:
ISDN Setup Wizard
NextPrevious Cancel
Note
DHCP Mode
Off
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
LAN Setup Wizard
NextPrevious Cancel