Sony PCS-G70P Trimmer User Manual


 
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\10OTH.FM
masterpage:Left
221Specifications
Using as the main terminal of a
multipoint videoconference
(Custom: TCP Port Number 3000
and UDP Port Number 3000)
When “Port Number Used” is set to
“Custom” in NAT/Port of the LAN Setup
menu, the PCS-PG70/PG70P uses the port
numbers defined by the values entered in
“TCP Port Number” and “UDP Port
Number”.
For example, when “TCP Port Number” is
set to “3000” and “UDP Port Number” is set
to “3100”, the PCS-PG70/PG70P operated
as the main terminal uses the following port
numbers.
Audio RTP 49152 49152+20 ×
(N-1)
Audio RTCP 49153 49153+20 ×
(N-1)
Video RTP 49154 49154+20 ×
(N-1)
Video RTCP 49155 49155+20 ×
(N-1)
FECC RTP 49156 49156+20 ×
(N-1)
FECC RTCP 49157 49157+20 ×
(N-1)
Data
conference/dual
video RTP
49158 49158+20 ×
(N-1)
Data
conference/dual
video RTCP
49159 49159+20 ×
(N-1)
Signal Port
number
(First point)
Port number
(N
th
point)
RAS (PCS-
PG70/PG70P)
Any number from 3000 to
3010 (using Gate
Keeper)
RAS
(GateKeeper)
1718 or 1719 (using Gate
Keeper)
Q.931 (dial) Any number from 3000 to
3010
Signal Port number
(First point)
Port number
(N
th
point)
Q.931 (answer) 1720
H.245 Any number from 3000 to
3010
Audio RTP 3100 3100+20 ×
(N-1)
Audio RTCP 3101 3101+20 ×
(N-1)
Video RTP 3102 3102+20 ×
(N-1)
Video RTCP 3103 3103+20 ×
(N-1)
FECC RTP 3104 3104+20 ×
(N-1)
FECC RTCP 3105 3105+20 ×
(N-1)
Data
conference/dual
video RTP
3106 3106+20 ×
(N-1)
Data
conference/dual
video RTCP
3107 3107+20 ×
(N-1)
Signal Port
number
(First point)
Port number
(N
th
point)