Filter
Top Products
62 Registering Local Information
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\04SET.FM
masterpage:Left
QoS Page 1/1
Hybrid
Allows you to select whether to use forward
error correction, send requests to resend
packets, and use adaptive rate control
depending on the network status.
On: Forward Error Correction, Packet
Resend Request, or Adaptive Rate
Control is used automatically depending
on the network status.
Off: The three functions above are not used
automatically depending on the network
status.
Forward Error Correction
Allows you to select whether received
packets containing errors are corrected upon
reception.
On: Corrects packets.
Off: Does not correct packets.
Packet Resend Request
Allows you to select whether to request
packet to be resent when packet losses occur
during communication.
On: Requests packets to be resent.
Off: Does not request packets to be resent.
Adaptive Rate Control
Allows you to select whether to always
optimize the LAN bandwidth.
On: Always optimizes the LAN bandwidth.
Off: Does not optimize the LAN bandwidth.
You can only configure “Adaptive Rate
Control” when “Packet Resend Request” is set
to “Off”. When “Packet Resend Request” is set
to “On”, “Adaptive Rate Control” is also
always set to “On”.
Type of Service (TOS) Page 1/1
TOS
Allows you to select how to define the Type
of Service (TOS) field.
Off: Does not define the TOS field.
IP Precedence: Defines the TOS field as IP
Precedence.
Diffserve: Defines the TOS field as
Diffserve.
IP Precedence
Enter the IP Precedence value, between 0 and 7.
Low Delay
Allows you to select whether to specify the
Low Delay bit rate of the TOS field.
On: Specifies the Low Delay bit rate of the
TOS field.
Off: Does not specify the Low Delay bit rate
of the TOS field.
High Throughput
Allows you to select whether to specify the
High Throughput bit rate of the TOS field.
On: Specifies the High Throughput bit rate
of the TOS field.
Off: Does not specify the High Throughput
bit rate of the TOS field.
High Reliability
Allows you to select whether to specify the
High Reliability bit rate of the TOS field.
On: Specifies the High Reliability bit rate of
the TOS field.
Off: Does not specify the High Reliability
bit rate of the TOS field.
Note
Hybrid
QoS
On
Page: 1/1
OnForward Error Correction
LAN
Save Cancel
On
Packet Resend Request
On
Adaptive Rate Control
LAN
Save Cancel
TOS
Page: 1/1
TOS
Off
IP Precedence
Off
Low Delay
Off
High Throughput
Off
High Reliability
Off
Minimum Cost