Filter
Top Products
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\06OPE.FM
masterpage:Left
117Receiving Still Images from a Remote Party
Receiving Still Images from a Remote
Party
During communication, you can receive still images taken by the remote
camera if the “Far End Camera Control” on page 3 of the Communication
Setup menu.
1 Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the (still image) icon with the
V or v button.
2 Press the FAR/NEAR button on the Remote Commander.
The picture shot by the remote camera and the FAR indicator appear on the
monitor screen in the Still Image menu window. “Send” in the menu turns to
“Receive”.
3 Use the V, v, B or b button on the Remote Commander to select
“Receive”, then press the PUSH ENTER button.
The remote picture displayed on the monitor screen is received as a still image.
To cancel still image display
Press the PUSH ENTER button on the Remote Commander to display the
submenu. Select “Clear” with the V
or v button, then press the PUSH ENTER
button.
Still Image
Send
Continuous Send
Stop
Save
Send Object