Filter
Top Products
Groundsmaster 4000--D/4010--DPage 3 -- 22Yanmar Diesel Engine
15.Connect coolant hoses to the radiator. Make sure ra-
diator draincock is closed. Fill radiator and coolant
reservoir with coolant.
16.Secure the wire harness, fuel lines and hydraulic
hoses to the engine with cable ties as noted during en-
gine removal.
17.Check position of electrical wires, fuel lines and hy-
draulic linesfor proper clearancewith rotating, hightem-
perature and moving components.
18.Connect positive battery cable topositive battery ter-
minal first and then connect negative cable to battery
(see Battery Service in the Service and Repairs section
of Chapter 5 -- Electrical System).
19.Check and adjust engine oil as needed.
20.Check and adjust oil level in hydraulic reservoir as
needed.
21.Prime the fuel system (see Fuel System in this sec -
tion).
22.Start engine and operate hydraulic controls to prop-
erly fill hydraulic system (see Charge Hydraulic System
in the Service and Repairs section of Chapter 4 -- Hy-
draulic System).
23.Close and secure hood.