Toro 30607 and 30609 Lawn Mower User Manual


 
Groundsmaster 4000--D/4010--DCutting Decks
Page 8 -- 6
Service and Repairs
CAUTION
Never install or work on the cutting decks or lift
arms with the engine running. Always stop en-
gine and remove key from ignition switch first.
Center Cutting Deck
Figure 1
FRONT
RIGHT
150 to 175 ft--lb
(203 to 237 N--m)
90 to 100 ft--lb
(123 to 135 N--m)
2
3
6
8
9
10
11
13
1
5
7
12
14
15
16
17
18
19
20
4
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
16
35
11
12
15
14
23
36
36
37
37
38
5
1. Center deck assembly
2. Grease fitting
3. Ball joint seal
4. Hydraulic deck motor
5. Flange head screw
6. RH lift arm
7. LH lift arm
8. Lift cylinder (2 used)
9. Pin (2 used)
10. Flange nut (2 used)
11. Jam nut (LH threads) (2 used)
12. Ball joint (LH threads) (2 used)
13. Cotter pin (2 used)
14. Ball joint mount (2 used)
15. Flange nut (2 per mount)
16. Cap screw (2 per mount)
17. Sensor plate
18. Carriage screw
19. Flat washer
20. Flange nut
21. U--bolt (2 used)
22. Height--of--cut chain (2 used)
23. Flat washer (4 per u--bolt)
24. Hex n ut (2 per u--bolt)
25. Lock nut (2 per u--bolt)
26. Clevis pin (2 used)
27. Hair pin (2 used)
28. Cap screw
29. Spherical rod end
30. Damper
31. Clevis rod end
32. Spring pin
33. Grease fitting (2 used)
34. Spacer
35. Flat washer (2 used)
36. Slotted hex nut
37. Grease fitting
38. Front frame