Filter
Top Products
Operating Instructions
2Ć12
MTG100 & MTG300 MPEG Generator Service Manual
Knob iconUnderscore character
Figure 2Ć9: Dialog box showing knob icon and underscore character
Perform the following procedure to change a value using the rotary knob:
1. Select the numeric parameter you want to change in an open dialog box.
2. Use the left and right arrow buttons to move the underscore character to the
digit value you want to modify.
3. Change the value by turning the rotary knob.
Text input is required to enter the names for new folders and for entering text for
other dialog box parameters. When text input is required, the MPEG generator
automatically brings up a dialog box such as the one shown in Figure 2-10.
Perform the following procedure to enter text input:
1. Use the rotary knob to highlight the desired character in the letter/digit
matrix, and then press the front-panel ENTER button enter the character in
the text box.
2. Continue as in step 1 until the name is entered in the text box. Use the
front-panel BS (back space) key to erase incorrect input. The position where
the character will be inserted is indicated with an input cursor ( | ). Use the
left and right arrow buttons to change the position of the input cursor.
3. After you enter all of the desired characters, press the OK bezel button to
complete the text entering process. Press the Cancel bezel button to cancel
text input and return to the previous display.
Figure 2Ć10: Dialog box for text input
Text Input