Filter
Top Products
Specifications
MTG100 & MTG300 MPEG Generator Service Manual
1Ć9
Table 1Ć3: Electrical characteristics (Cont.)
Characteristics Description
SSI output Complies with SMPTE 310M.
Connector type BNC
Impedance 75 W
Data rate 1 Mbps to 40 Mbps (Not managed when the data frequency is more than 40 Mbps.)
Output voltage 800 mV ± 10 %
Return loss u 30 dB , 100 kHz to 80 MHz
Drift and wander t 0.028 ppm/s, t 1 kHz
Jitter t 2 ns, 1 kHz to 800 kHz
Rise/fall time (20 % to 80%) 0.4 ns to 5.0 ns
t 1.6 ns (difference between rise and fall time)
Condition This output cannot be used with the external clock input.
Display
Display area Width: 13.2 cm (5.2 inches)
Height: 9.9 cm (3.9 inches)
Resolution Horizontal: 640 pixels
Vertical: 480 pixels
AC line power
Rating Voltage 100 to 240 VAC
Voltage Range 90 to 250 VAC
Frequency Range 48 to 63 Hz
Maximum power 200 W
Maximum current 2A
Installation Category CAT II
Table 1Ć4: Mechanical characteristics
Characteristics Description
Net weight
Standard Approximately 14 kg
Dimensions
Height 132 mm (without front feet extended)
Width 430 mm
Length 560 mm