Filter
Top Products
Specifications
1Ć8
MTG100 & MTG300 MPEG Generator Service Manual
Table 1Ć3: Electrical characteristics (Cont.)
Characteristics Description
ECL/TTL/LVDS output (serial)
Connector type DĆsub, 25 pin (the same connector as Parallel output)
Output level (Output on)
(J310101 and above)
Note: Do not connect the Asserted Low pins for singleĆend use. Do not connect the Not ManĆ
aged" pins to GND pins.
TTL 0 V to 2.8 V (without termination)
LVDS 0.8 V to 1.60 V (without termination)
ECL* -1.8 V to -0.9 V (without termination)
Output resistance, typical
(Output off)
350 W at5VtoGNDpin(When the output is off, the power of the buffer amplifier is cut off.)
Data rate 1 Mbps to 64 Mbps
Pin Assignment 1 DCLK
2 GND
3 to 9 Not managed
10 DATA 0
11 DVALID
12 PSYNC
13 Shield
14 DCLK
15 GND
16 to 22 Not managed
23 DATA 0
24 DVALID
25 PSYNC
ASI output Complies with EN50083Ć9 Annex B.
Connector type BNC
Impedance, typical 75 W
Output voltage 800 mV ± 10%
Deterministic Jitter 10% (pĆp)
Random Jitter 8% (pĆp)
Rise/fall time (20% to 80%) t 1.2 ns
Transmission format Data packets (Insert Packet unit), Data Bursts (Insert Word unit)