Tektronix MTG100, MTG300 Portable Generator User Manual


 
Operating Instructions
MTG100 & MTG300 MPEG Generator Service Manual
2Ć11
You can enter numeric values in displayed dialog boxes by using the hexadeci-
mal keypad or by using the rotary knob.
Numeric Input Using the Hexadecimal Keypad. Perform the following procedure to
input numeric values. Figure 2-8 shows the hexadecimal keypad.
1. Select the numeric parameter you want to change in an open dialog box.
2. Input the desired parameter value using the numeric keys on the keypad, and
then press the keypad ENTER key.
3. Press the Apply or OK bezel button associated with the dialog box for your
value changes to take effect.
Figure 2Ć8: Hexadecimal keypad
Numeric Input Using the Rotary Knob. The knob icon is displayed next to a
selected dialog box parameter when you can use the rotary knob to change the
parameter value. Figure 2-9 shows a dialog box that can use the rotary knob to
enter numeric values.
You can use the rotary knob to change the value of the numeric digit indicated by
the underscore character. Use the arrow buttons to select any digit value to
change with the knob. Rotating the knob to the left decreases the value and
rotating it to the right increases the value.
You do not need to use the front panel ENTER key to confirm a value when
using the rotary knob to change a value. The input value is confirmed automati-
cally without pressing the ENTER key.
Numeric Input