Operating Instructions
2Ć8
MTG100 & MTG300 MPEG Generator Service Manual
The pull-down menus are displayed in the Menu bar at the top of the screen. You
can operate these menus using the front panel MENU button, the right and left
control buttons, the arrow buttons, and the rotary knob (see Figure 2-4).
Accessing PullĆdown Menu Commands. The MENU button toggles display
control between the Icon cursor (used to select icons in the hierarchy display)
and the pull-down menus. When the Icon cursor is enabled (displayed), press the
MENU button to enable the pull-down menus. When the pull-down menus are
enabled or displayed, press the MENU button to close any open pull-down menu
and to enable (display) the Icon cursor.
When the pull-down menus are enabled, the Icon cursor is not displayed and the
currently selected pull-down menu name is highlighted in the Menu bar. Use the
arrow buttons to select (highlight) the desired pull-down menu name. Press the
left or right control buttons to open the selected menu (see Figure 2-5).
MENU
button
Left control
button
Right control
button
Arrow buttons
Rotary knob
Figure 2Ć4: Front panel showing the pullĆdown menu controls
PullĆdown Menus