Filter
Top Products
Removal and Installation Procedures
6Ć42
MTG100 & MTG300 MPEG Generator Service Manual
From J060 on
A40 board
From J150 on
A40 board
From J100 on
A40 board
From J0602
on A10 board
From J160 on
A40 board
From J0600
on A10 board
From J140 on
A40 board
From J110 on
A40 board
From J120 on
A40 board
From J130 on
A40 board
Figure 6Ć20: CPU unit removal
4. Remove the CPU Board: See Figure 6-21.
a. Using a screwdriver with a size Phillips #2 tip , remove the screw
securing the CPU board to the frame with a retainer on the right side of
the unit.
b. Remove the screw on the left side of the CPU board.
c. Grasp the board and slide it out of the unit.