Filter
Top Products
10 - 11
MELSEC-Q
10. POSITIONING DEBUGGING
10.2.5 Axis operation monitor
PURPOSE
Monitor the settings, states and others of the axis control data, velocity/position
control, position/velocity control, original point return and JOG/MPG operation
during operation monitor.
With operation monitor, you can check the detailed states of operation and the
QD75 settings made with the sequence program or peripheral device.
For each monitor item, refer to QD75 User's Manual.
BASIC OPERATION
1. Perform the basic operation in Section 10.2.2 to display the operation monitor
window.
2. Click the "<Axis #1 to #4> Operation" button in the operation monitor window.
3. Click the <<Axis control data>>/<<Velocity/position
control>>/<<Position/velocity control>>/<<OPR>>/<<JOG/MPG>> tab in the
Operation dialog box.
DISPLAY/SETTING SCREEN
[Axis control data monitor]
(Screen example shows <Axis #1> Operation monitor.)