Filter
Top Products
11 - 6
MELSEC-Q
11. USEFUL FUNCTIONS
11.1.4 Multi-module batch write
PURPOSE
Batch write to multiple QD75s.
• Whether multi-module batch write may be performed or not is determined by the
PLC state check setting in Option setting. (Refer to Section 11.5)
BASIC OPERATION
1. Open all projects to be batch written.
2. Specify the connection target in each project. (Refer to Section 7.1.)
3. Click the [Online]
[Writing of batch of multi-module] menu.
4. Choose the project from the project list in the Writing multi-module dialog box,
And click the ">>Selected" button.
5. Choose project displayed in the Write project list and click the "Set" button.
6. Set the types and ranges of the data to be written and click the "OK" button.
7. Repeat the above steps 4 to 6 for the projects to be batch written.
8. Click the "Write" button in the Writing multi-module dialog box.
DISPLAY/SETTING SCREEN
[Writing multi-module dialog box]