Filter
Top Products
8 - 8
MELSEC-Q
8. DATA SETTING
8.2.2 M code comment
PURPOSE
Set comments to M codes which are required for control exercised in
synchronization with positioning control.
M code comments are data which can be saved only in the personal computer.
Up to 50 comments can be set for each axis.
BASIC OPERATION
1. Choose the positioning data of the axis to which the M code comments will be
set.
Double-click.Double-click.
2. Click the [Edit]
[M code comment] menu.
3. Set the M code comments.
4. To exit, click the "OK" button in the M code comment dialog box.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
M code Set the M code No. to be commented.
M code comment
Set a comment of up to 32 characters.
Up to 50 comments can be set for each axis.
"OK" button Click this button to finish the setting.
"Delete" button Click this button to delete the selected comment.