Mitsubishi Electronics SW0D5C-QD75P-E Weather Radio User Manual


 
11 - 19
MELSEC-Q
11. USEFUL FUNCTIONS
(From the preceding page)
9) Set the positioning data No. in Start and click the
"Start" button to start test operation.
Use the "Stop", "Error reset" and/or "M code OFF"
button as necessary.
10) When the test is over, click the "Test stop" button.
After exiting from the test mode, click the
"Next>>" button.
11) When saving the set parameters and positioning
data, click the "Save as project" button.
When not saving them, click the "End" button.