Filter
Top Products
7 - 4
MELSEC-Q
7. SYSTEM CHECKING FROM PERIPHERAL DEVICE
7.2 System Monitor
PURPOSE
Check the module configuration, I/O address, QD75 model and axis statuses of
the station (system) connected.
BASIC OPERATION
1. Set the connection target. (Refer to Section 7.1.)
2. Click the [Tool]
[System monitor] menu.
3. The QD75 on the connected station appears in the System monitor dialog box.
4. Click the QD75 illustration and check the I/O address, model and axis statutes.
5. To exit, click the "Close" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
System monitor
Shows the connection target PLC system.
Clicking the QD75 illustration shows the QD75 module information.
QD75 Information Shows the I/O address, module type and module axis statuses.
"Update" button Click this button to show the latest system information.