Filter
Top Products
11 - 15
MELSEC-Q
11. USEFUL FUNCTIONS
11.3 Copying the Data
Copy the positioning data, block start data and parameters set to the project axis-by-
axis.
Also, copy the set block start data to another block.
When copying data to another project, use copy/paste of the edit function. (Refer to
Section 11.2.1.)
11.3.1 Copying the data on an axis basis (Axis copy)
PURPOSE
Using the axis copy function, copy the positioning data, block start data and
parameters of any axis to another axis of the same project.
• When the axis copy is performed, data may not match between the axes. After
performing the axis copy, please carry out an error check (refer to Section 8.5).
BASIC OPERATION
1. Display any of the parameters (refer to Section 8.1), positioning data (refer to
Section 8.2) and block start data (refer to Section 8.4) edit windows.
2. Click the [Edit]
[Axis copy] menu.
3. Set the axis of the copy source, the types of the data to be copied, and the axis
of the copy destination.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Copy source data
Choose the axis of the copy source and set the data to be copied.
The block start data includes condition data.
Copy destination Set the axis of the copy destination.
"OK" button Click this button to copy the data.