Filter
Top Products
1 - 1
MELSEC-Q
1. OVERVIEW
1
1. OVERVIEW
This manual describes the functions and operating procedures of positioning module
software package (hereinafter referred to as "SW
D5C-QD75P-E").
SW
D5C-QD75P-E is a positioning module software package which can perform the
following functions via the QCPU, Q corresponding serial communication module or Q
corresponding MELSECNET/H network remote I/O module.
• Setting of positioning data and parameters
• Simulation using positioning data
• Read/write of data from/to positioning module
• Monitoring of positioning control status
• Test operation of positioning control
• Automatic refresh setting between QCPU devices and QD75 buffer memory
SW
D5C-QD75P-E can be used with any of the following positioning modules.
Positioning Type Type
Open collector output type QD75P1,QD75P2, QD75P4
Differential driver output type QD75D1,QD75D2, QD75D4
SW D5C-QD75P-E can access the QD75 via any of the following modules.
Module Type Type
QCPU Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
Q corresponding serial
communication module
QJ71C24, QJ71C24-R2
Q corresponding MELSECNET/H
network remote I/O module
QJ72LP25-25, QJ72BR15
Only when connecting to the remote I/O module directry.