Filter
Top Products
8 - 1
MELSEC-Q
8. DATA SETTING
8
8. DATA SETTING
Set the parameters, positioning data and block start data to be written to the QD75,
and check the setting ranges and matching of the data using the simulation or error
check function.
Write the preset parameters, positioning data and block start data to the QD75 before
starting positioning operation.
Refer to Section 9.1 for the operation to write the data to the QD75.
8.1 Parameter Setting
Set the parameters necessary to exercise positioning control.
For the setting data, refer to the QD75 user's manual.
PURPOSE
There are the following four parameter types.
• Basic parameters
• Extended parameters
• OPR basic parameters
• OPR extended parameters
The basic and extended parameters are divided into parameters 1 needed for
system start and parameters 2 optimized according to the connected external
devices and control.
BASIC OPERATION
1. Choose Parameter.
Double click
Double click
¨
2. Make setting in the parameter edit window.