Filter
Top Products
8 - 16
MELSEC-Q
8. DATA SETTING
8.5 Error Check
PURPOSE
Make error check to check the parameter settings, positioning data and block start
data for mismatches and setting omissions.
For the error check range, refer to QD75 User's Manual.
BASIC OPERATION
1. Set the error-checked project as the active project on the project tree view.
(Refer to Section 5.2.)
2. Click the [Tool]
[Error check] menu.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Error check item In the check box, set the data on which error check will be made.
"Check" button Click this button to start error check.
"Jump" button Click this button to show the error locations.
Error check result
When error check is completed, the number of errors and error locations appear.
On the above screen, error locations are the command speed of axis #1 positioning data No.
7 and the parameter at point No. 1 of axis #1 block No. 0.