Filter
Top Products
8 - 9
MELSEC-Q
8. DATA SETTING
8.3 Simulation
PURPOSE
Execute simulation (virtual positioning) with the set positioning data to check the
operation of the axis.
The axis speed is displayed as locus data for 1-axis control or as locus data for 2-
axis interpolation control.
You cannot perform simulation for 3-/4-axis interpolation control.
BASIC OPERATION
1. Open the positioning data edit window.
Double-click.Double-click.
2. Click the [Edit] [Simulation] menu.
3. Type the first No. of positioning data in the simulation window.
4. Setting or changing the positioning data being simulated in the positioning data
edit window shows the simulation result at the point of data input.
5. To exit, click the "CLOSE" button.
DISPLAY/SETTING SCREEN
[Locus data for 1-axis control]