Mitsubishi Electronics SW0D5C-QD75P-E Weather Radio User Manual


 
11 - 29
MELSEC-Q
11. USEFUL FUNCTIONS
11.8 Wave Trace
Using the wave trace function in the trace mode, show the speed command (axis
speed) for positioning operation as waveform data.
11.8.1 Wave trace condition setting
PURPOSE
To execute the wave trace, set the trace starting condition and the data to be
traced.
BASIC OPERATION
1. Choose Wave trace.
Double-click. Double-click.
2. Click the "Setting" button in the wave trace window.
3. Set the Trace interval, Trace trigger, Stop condition, axis and data to be traced
in the Trace setting dialog box.
4. Click the "OK" button in the Trace setting dialog box.
5. For the tracing operation that follows, refer to Section 11.8.2.
DISPLAY/SETTING SCREEN