Mitsubishi Electronics SW0D5C-QD75P-E Weather Radio User Manual


 
11 - 16
MELSEC-Q
11. USEFUL FUNCTIONS
11.3.2 Block start copy
PURPOSE
Using the block start copy function, copy the block start data to the other blocks.
The block start copy function is performed to copy data between blocks in the
same project.
BASIC OPERATION
1. Display the block start data edit window (refer to Section 8.4).
2. Click the [Edit]
[Block start copy] menu.
3. Set the block No. of the copy source and the block No. of the copy destination.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Copy source block No. Choose the copy axis and the block No. of the copy source.
Copy destination block No.
Set the copy axis and the block No. of the copy destination.
Multiple blocks can be set at the same time.
"OK" button Click this button to copy the data.