Filter
Top Products
11 - 14
MELSEC-Q
11. USEFUL FUNCTIONS
11.2.4 Initializing the data
PURPOSE
Initialize the parameters, positioning data and block start data (including condition
data) of the active project axis-by-axis.
Note that the project data saved in the QD75, HD and FD are not initialized.
BASIC OPERATION
1. Set the project to be initialized as the active project. (Refer to Section 5.2.)
2. Click the [Tool]
[Initialize data] menu.
3. Set the types and axes of the data to be initialized in the Data initialize dialog
box.
4. Click the "OK" button.
DISPLAY/SETTING SCREEN
DISPLAY/SETTING DATA
Item Description
Positioning data
Set the axes of the positioning data to be initialized.
Check "ALL" to initialize the positioning data of all axes.
Block start data
Set the axes of the block start data to be initialized.
Check "ALL" to initialize the block start data of all axes.
Parameter data
Set the axes of the parameters to be initialized.
Check "ALL" to initialize the parameter data of all axes.
"OK" button Click this button to initialize the data.