Filter
Top Products
66 ErrorMessages
201 to 702: Device-Specific Errors ESG Family Signal Generators
Configuration error; Old bootrom detected. File system and
instrument state re-initialized due to firmware upgrade.
Replace bootrom to avoid this in the future.
The firmware has detected that the instrument contains an old bootrom
version. As a result the user file system, arb file system (if present), and
instrument states have been re-initialized. Instrument calibration files
have not been affected. In the future, to avoid re-initialization of the file
system and instrument states that will occur with firmware upgrades,
return the instrument to Agilent Technologies for bootrom replacement.
Configuration error; <OPTION>, Invalid (inconsistent) license
key.
The License Key for the indicated software option is invalid. If the option
has not been purchased, then enter a value of zero for its key to disable the
option, otherwise enter the correct value from the License Key Certificate.
618 RS232 times out; RS232 reset.
If further input is not received within the timeout time while a SCPI
command is being processed, the command is aborted and the input buffer
is cleared.
619 DSP code is invalid; Bert board FPGA.
The host reads an unexpected FPGA version number from the Bert board.
The FPGA version check is done by the DSP, so this error message is not
generated if a DSP download Fail error message has already been
generated. In this case, were do not know if the FPGA code stored in flash
memory is correct.
DSP code is invalid; Bert DSP code is invalid.
The host reads an unexpected DSP version number from the demodulator
board.
DSP code is invalid; Demodulator board FPGA.
The demodulator’s FPGA code is not the revision that the firmware
expects.
DSP code is invalid; Demodulator DSP code is invalid.
The host reads and unexpected DSP version number from the demodulator
board.
DSP code is invalid; Demodulator main DSP code is invalid.
The demodulator board has an invalid revision of DSP firmware code.