Filter
Top Products
32 ErrorMessages
-299 to -200: Execution Errors ESG Family Signal Generators
Settings conflict; Cannot have a secondary frame with
alternate amplitude. The secondary frame is unchanged.
The secondary frame feature has many potential conflicts. Some of the
conflicts leave the secondary pattern and its state as they were prior to the
command that led to the error message, and some turn off the secondary
state, since the primary state is not compatible and it has priority.
Settings conflict; Cannot have a continuous and discontinuous
frame at the same time. The secondary frame has been turned
off.
The secondary frame feature has many potential conflicts. Some of the
conflicts leave the secondary pattern and its state as they were prior to the
command that led to the error message, and some turn off the secondary
state, since the primary state is not compatible and it has priority.
Settings conflict; Cannot have a secondary frame with a
non-framed data pattern. The secondary frame has been turned
off.
The secondary frame feature has many potential conflicts. Some of the
conflicts leave the secondary pattern and its state as they were prior to the
command that led to the error message, and some turn off the secondary
state, since the primary state is not compatible and it has priority.
Settings conflict; Cannot have a secondary frame with all
timeslots off in the primary frame. The secondary frame has
been turned off.
The secondary frame feature has many potential conflicts. Some of the
conflicts leave the secondary pattern and its state as they were prior to the
command that led to the error message, and some turn off the secondary
state, since the primary state is not compatible and it has priority.
Settings conflict; Cannot have a secondary frame while the
primary frame has alternate amplitude. The secondary frame has
been turned off.
The secondary frame feature has many potential conflicts. Some of the
conflicts leave the secondary pattern and its state as they were prior to the
command that led to the error message, and some turn off the secondary
state, since the primary state is not compatible and it has priority.
Settings conflict; Cannot have a secondary frame with a
different modulation type than the primary frame. The
secondary frame has been turned off.
The primary and secondary frames must have the same modulation types.
If they do not, the secondary frame is turned off.