Filter
Top Products
28 ErrorMessages
-299 to -200: Execution Errors ESG Family Signal Generators
Due to a hardware limitations, only a certain number of unique data
points can be created for the IQ map. This channel power level has
resulted in an IQ map that exceeds the hardware limit when turned on,
and cannot be accommodated. The channel has been turned off to retain a
valid signal. To turn this channel on, try a different power setting or turn
some other channel off.
Too much data; The number of CDMA channels exceeds the maximum
allowed.
The maximum number of CDMA channels is defined in the technical
specifications document.
Too much data; The number of CDMA carriers exceeds the maximum
allowed.
The maximum number of CDMA carriers is defined in the technical
specifications document.
Too Much Data; The number of list points exceeds the maximum
allowed.
Some tables have a maximum number of entries. Sweep/List can only have
401 points, for example.
Option UN8 cannot use an I/Q map that has more than 16 unique values
for both I and Q. You can use global search and replace to replace all
occurrences of a given value (in both I and Q) with a different value.
Too Much Data; The number of list points in the table exceeds
the maximum allowed.
Some tables have a maximum number of entries. Sweep/List can only have
401 points, for example.
Too much data; The number of points in the table exceeds the
maximum allowed.
This occurs when you try to create a table that is too big. For example, if
you enter a list in SCPI that is longer than the maximum allowed length,
or if you attempt to expand a table and the table is already at its
maximum length.
Too Much Data; Only 16 distinct values are allowed for I and Q
values.
The current hardware allows a maximum of 16 unique values for I and Q.
Try a different modulation.