Agilent Technologies E4400-90333 Portable Generator User Manual


 
Error Messages 63
ESG Family Signal Generators 201 to 702: Device-Specific Errors
DSP returns error; ARB data line error (code)
The dual arbitrary waveform generator (Option UND) digital signal
processor (DSP) detected an internal error when processing a command.
The DSP specific error code is displayed in the parenthesis. Report this
error to the nearest Agilent Technologies sales or service office.
DSP returns error; ARB FLASH memory error (code)
The dual arbitrary waveform generator (Option UND) digital signal
processor (DSP) detected an internal error when processing a command.
The DSP specific error code is displayed in the parenthesis. Report this
error to the nearest Agilent Technologies sales or service office.
DSP returns error; ARB parameters error (code)
The dual arbitrary waveform generator (Option UND) digital signal
processor (DSP) detected a communications error with the command sent
to it. The DSP specific error code is displayed in the parenthesis. Report
this error to the nearest Agilent Technologies sales or service office.
DSP returns error; ARB self test error (code)
The dual arbitrary waveform generator (Option UND) digital signal
processor (DSP) detected an internal error when processing a command.
The DSP specific error code is displayed in the parenthesis. Report this
error to the nearest Agilent Technologies sales or service office.
DSP returns error; Option 300 BERT capability
Option 300 DSP for BERT capability returns an error.
608 DSP in use by other process.
The digital signal processor (DSP) is in an indeterminate state. Report this
error to the nearest Agilent Technologies sales or service office.
615 New wave shape changes limit for internal frequency; frequency
changed to new limit.
When using the internal modulation source, the upper limit varies for the
different waveforms. If the user changes the waveform when the internal
source frequency is higher than that allowed for the new waveform, the
frequency for the source will be changed, and the user informed of that
change with this message.