Filter
Top Products
Error Messages 65
ESG Family Signal Generators 201 to 702: Device-Specific Errors
Configuration error; Installed board not supported.
An option board or board combination that is not supported by the
installed firmware has been specified or detected. Be sure that you have
the proper instrument and firmware to support the option board, and that
you have specified a supported combination of options.
Configuration error; Invalid Data Generator memory
configuration.
The memory configuration for an option board does not match the known
memory limits of any supported option board. If this error has occurred as
the result of a customer-installed option, uninstall all options and then
reinstall the correct options. Report this error to the nearest
Agilent Technologies sales or service office.
Configuration error; Invalid file system configuration block
size defaulted.
A block size configuration error was detected by the file system. A default
value has been used. Report this error to the nearest Agilent Technologies
sales or service office.
Configuration error; Invalid file system configuration max
files defaulted.
A maximum files configuration error was detected by the file system. A
default value has been used. Report this error to the nearest
Agilent Technologies sales or service office.
Configuration error; Invalid file system configuration memory
size defaulted.
A memory size configuration error was detected by the file system. A
default value has been used. Report this error to the nearest
Agilent Technologies sales or service office.
Configuration error; Invalid option board configuration.
An invalid combination of option boards has been configured. If this error
has occurred as the result of a customer-installed option, uninstall all
options and then reinstall the correct options. Report this error to the
nearest Agilent Technologies sales or service office.