Filter
Top Products
Error Messages 27
ESG Family Signal Generators -299 to -200: Execution Errors
-223 Too much data
A legal program data element of block, expression or string type was
received that contained more data than the device could handle due to
memory or related device-specific requirements.
Too much data; The current setting results in too many data
points. A new symbol map cannot be generated. CDMA2000 has
been turned off.
Due to a hardware limitation, only a certain number of unique data points
can be created for the IQ map. CDMA2000 mode turns off when the power
combination of all channels exceed that limit. Adjust the channel power
level and try again.
Too much data; The current setting results in too many data
points. A new symbol map cannot be generated. The IQ Rotation
has been restored to previous value.
Due to a hardware limitations, only a certain number of unique data
points can be created for the IQ map. IQ rotation is designed to alleviate
this problem, but used incorrectly can result in undesirable effects. This
error indicates that the current IQ rotation is optimal and cannot be
changed.
Too much data; The current setting results in too many data
points. A new symbol map cannot be generated. The format has
been turned off.
Due to a hardware limitation, only 256 unique data points can be created
for the IQ map. W-CDMA mode turns off when the power combination of
all channels exceeds that limit. Adjust the channel power level and try
again.
Too much data; The current setting results in too many data
points. A new symbol map cannot be generated. The current
channel has been restored to its previous type.
Due to a hardware limitations, only a certain number of unique data
points can be created for the IQ map. This channel type, together with its
power setting, has exceeded that limit. The channel type reverts to its
previous type to retain a valid signal. To try a different power setting, turn
the channel off, switch to the desired type, change the power setting, and
then turn the channel back on.
Too much data; The current setting results in too many data
points. A new symbol map cannot be generated. The current
channel has been turned off.