Filter
Top Products
Error Messages 43
ESG Family Signal Generators -299 to -200: Execution Errors
Settings conflict; RSCH is only defined for Radio
Configuration 1 and 2. You must set one of these Radio
Configurations before configuring or using this code channel.
The command attempted to enter a value or setting for the R-SCH in RC1
or 2. If this is the correct R-SCH, change to the desired radio configuration
and resend the command. If not, select the command for the desired
R-SCH. Use the following list to determine the correct R-SCH command to
use:
R-SCH Used in RC1 and 2
R-SCH1 Used in RC3 and 4 for channel 4
R-SCH2 Used in RC3 and 4 for channel 2
Refer to chapter 5 in the Option 201 user’s and programming guide for
more information.
Settings conflict; RSCH1 is only defined for Radio
Configuration 3 and 4. You must set one of these Radio
Configurations before configuring or using this code channel.
The command attempted to enter a value or setting for the R-SCH1 in RC3
or 4. If this is the correct R-SCH, change to the desired radio configuration
and resend the command. If not, select the command for the desired
R-SCH. Use the following list to determine the correct R-SCH command to
use:
R-SCH Used in RC1 and 2
R-SCH1 Used in RC3 and 4 for channel 4
R-SCH2 Used in RC3 and 4 for channel 2
Refer to chapter 5 in the Option 201 user’s and programming guide for
more information.
Settings conflict; RSCH2 is only defined for Radio
Configuration 3 and 4. You must set one of these Radio
Configurations before configuring or using this code channel.
The command attempted to enter a value or setting for the R-SCH in RC3
or 4. If this is the correct R-SCH, change to the desired radio configuration
and resend the command. If not, select the command for the desired
R-SCH. Use the following list to determine the correct R-SCH command to
use:
R-SCH Used in RC1 and 2
R-SCH1 Used in RC3 and 4 for channel 4
R-SCH2 Used in RC3 and 4 for channel 2
Refer to chapter 5 in the Option 201 user’s and programming guide for
more information.