Filter
Top Products
12 Introduction
FXDeko User’s Guide
STARTING WINDOWS NT
To start Windows NT:
1. Turn on the power to the PC. The computer monitor shows a series
of diagnostic screens, then displays the Windows NT startup
screen. Press Ctrl+Alt+Delete to log on.
2. Enter your user name and password, then press Enter. If you don’t
have a user name, log on as user "FXDeko". This user name is
installed at the factory and does not require a password.
Notes
Once you log on, you will see the Windows NT Program
Manager. This is the main screen of Windows NT, from which
you can launch any application program, including FXDeko.
You must be privileged as a System Administrator or Power
User to run FXDeko.For more information about Windows
NT, refer to the Windows NT documentation supplied with
FXDeko.
STARTING FXDEKO
To start FXDeko:
Double-click the FXDeko program icon.
To start FXDeko automatically, every time you log
on:
In the Windows NT Program manager, hold Ctrl down and drag the
FXDeko program icon into the Startup group. Refer to your
Windows NT documentation for more information.
EXITING FXDEKO
To exit FXDeko and return to the Program
Manager:
Do one of the following:
• Double-click the control icon at the left end of the FXDeko
program title bar, or choose Close from the control icon menu.
• From the File menu, choose Exit.