Filter
Top Products
Setup/Hold Field (State only)
Setup/Hold adjusts the relative position (in time) of the clock edge with
respect to the time period that data is valid. When the Setup/Hold field is
selected, a configuration menu appears. Use this Setup/Hold configuration
menu to select each pod in the analyzer and assign a Setup/Hold selection
from the selection list.
With a single clock edge assigned, the choices range from 3.5 ns Setup/0.0 ns
Hold to 0.0 ns Setup/3.5 ns Hold. With both edges of a single clock assigned,
the choices are from 4.0 ns Setup/0.0 ns Hold to 0.0 ns Setup/4.0 ns Hold. If
the analyzer has multiple clock edges assigned, the choices range from 4.5 ns
Setup/0.0 ns Hold to 0.0 ns Setup/4.5 ns Hold.
Setup and Hold Menu
The Format Menu
Setup/Hold Field (State only)
4–15