Filter
Top Products
Probe Leads
The probe leads consists of a 12-inch twisted pair cable, a ground tap, and
one grabber. The probe lead, which connects to the target system, has an
integrated RC network with an input impedance of 100 k
Ω
in parallel with
approximately 8 pF, and all in series with 250
Ω
.
The probe lead has a two-pin connector on one end that snaps into the probe
housing.
Probe Lead
Grabbers
The grabbers have a small hook that fits around the IC pins and component
leads. The grabbers have been designed to fit on adjacent IC pins on either
through-hole or surface-mount components with lead spacing greater than or
equal to 0.050 in.
Probe lead connector
Probing
General-Purpose Probing System Description
2–19