Filter
Top Products
Trig to X / Trig to O Fields
The Trig to X and Trig to O fields display the time between the trigger point
and the marker. They are also used to position the markers with reference to
the vertical red trigger line.
Set the marker position by selecting the Trig to X and Trig to O fields, then,
after the fields turn light blue, rotate the knob. In addition, values can be
entered by selecting the light blue field a second time, then using the pop-up
keypad that appears.
X to O Field
In a state analyzer configuration, the X to O field is a "read only" field that
displays the difference between the X and O markers. As the X and O
markers are changed, the display changes accordingly.
In a timing analyzer configuration, you can select and set the X to O field. If
this field is changed, both X and O markers will move simultaneously with the
relative difference remaining unchanged.
Trig to X / Trig to O Fields
The Waveform Menu
Trig to X / Trig to O Fields
7–18