Filter
Top Products
The statistics generated are based on the time between the X and O
markers. Both markers must be found before valid statistical
information is displayed.
In repetitive run mode, the display is updated each time a valid run
occurs until you press Stop. If you press Run after pressing Stop, the
statistics continue to update without loss of information. All
statistical information can be cleared at any time by selecting the
Reset Statistics field.
In single run mode, each time you press Run an additional valid run
will be added to the data and the statistics will be updated. This
process continues unless you change the placement of the X and O
Pattern markers between runs.
Statistics Display
The Waveform Menu
Marker Label / Base and Display
7–21