Filter
Top Products
Stop Measurement Field
The Stop measurement function allows you to specify a condition which
stops the analyzer measurement during a repetitive run. If two analyzers are
configured, both analyzers will stop when either specified stop condition is
satisfied.
When the Stop measurement field is selected, a Stop measurement type
menu appears. Depending on the analyzer configuration, you have the
choices of Off, X-O, and Compare.
Off
The Off selection turns all Stop measurement operations off. If the Stop
measurement operation is not turned off and the stop criteria are met, the
measurement will stop even though the markers are set to other types or
turned off.
Stop Measurement Field
The Listing Menu
Stop Measurement Field
6–12