Filter
Top Products
Compare
Compare is only available when the analyzer type is set to State Compare in
the Configuration menu. When Compare is selected, a repetitive run will be
terminated when a comparison of data in the Listing menu and the data and
criteria in the Reference listing matches an equality selection. The equality
selection is set from the Equal/Not Equal selection pop-up menu.
Equal
The data and compare criteria in the Compare menu must be
equal to the data in the Listing menu.
Not Equal
The data and compare criteria in the Compare menu must
not be equal to the data in the Listing menu.
Compare Field and Pop-up Menu
The Chart Menu
Pattern
8–12