Filter
Top Products
Count Field (State and State Compare only)
The Count field accesses a selection menu which stamps the acquisition data
at each memory location with either a Time tag or a State tag. If you have all
pod pairs assigned, the state acquisition memory is reduced by half when
time or state tags are turned on. You can maintain full memory depth if you
leave a pod pair unassigned. This section discusses:
•
State Tags
•
Time Tags
•
Memory Depth Considerations
State Tags
If you select Count States, each time the system stores a data record it
counts the number of occurrences of a particular combination of states that
you specify, until a new data record is stored. The system then stores the
count, or "state tag," along with the new data record, and the process repeats.
When the measurement is completed, each piece of stored data is displayed
with its associated "state tag" count.
State tags displayed this way are RELATIVE to the previous count, or they
can be displayed as ABSOLUTE, indicating cumulative counts relative to the
trigger point.
Count Field
The Trigger Menu
Count Field (State and State Compare only)
5–35