Filter
Top Products
X-pat / O-pat Occurrence Fields
The X-pattern and O-pattern occurrence fields designate which pattern
occurrence the marker is placed on. The range for the occurrence counter
depends on the logic analyzer model and the memory depth selected. If you
enter a number outside the range, the closest valid number will be
substituted.
The occurrence field can be set in two ways. When the field is selected one
time, it turns light blue and the knob becomes the entry method. If the field
is selected a second time, a pop-up keypad appears and becomes the entry
method.
The reference point from which the occurrence counter starts is either the
trigger point, the start of the trace, or in the case of the O marker, the X
marker. If a negative number is set, the analyzer will search for pre-trigger
occurrences.
X-pattern and O-pattern Occurrence Fields
O-pattern occurrence
field
The Waveform Menu
X-pat / O-pat Occurrence Fields
7–13