Filter
Top Products
Fields
User’s Guide 87
1. Create an Input node to download a inventory file from the PC to a
portable file.
2. Use second
Input node to store a scanned part number in a register
named Part Number.
3. Copy the Part Number register to a Lookup register.
4. Append ,* to the lookup key (wild card lookup).
5. Lookup Lookup register against the inventory file.
This assumes that the inventory file is comma delimited, and contains Part
Number and Quantity fields.
Fields
Fields are a breakdown of data in a single register. Most programs expect to see
related values on the same line. Each line is referred to as a
record, and each
item on the line is called a
field.
The fields are either set to a fixed length (so that they appear in columns in the
data file), or they are allowed a variable length with a separator (such as a
comma) separating them. You can also use a template to break apart data
stored in a register into separate fields.
To cre ate a n ew
Field, select Create > Data > Field from the menubar to open
the
Create Field dialog, shown in Figure 58.
Figure 58. Create Field Dialog
To edit an existing Field:
1. Locate the field in the PPG
Explorer; right-click to open a pop-up
menu.
2. Select
Properties.
2342.book Page 87 Thursday, July 22, 2004 8:35 AM