Filter
Top Products
Error Messages
User’s Guide 175
PPGComp Error Messages
Table 7. PPGComp Error Messages
Unrecognized node type found
An unrecognized node type has been read. This
usually indicates that the
.scr file has been
corrupted. Contact Technical Support for assis-
tance.
Error Message Description
Can't access PPGXFER
tool to download
application
The PPGXfer application must be located in the same direc-
tory as PPGComp. If the PPGXfer (PPGXfer.exe) is missing,
reinstall PPG to restore all files.
Can't allocate scanner to
analyze source code
These errors indicate that there is insufficient memory avail-
able to run PPGComp. Close other applications and try
again. If no other applications are open, you may need to
reboot your PC before trying again.
Error creating <file name>
An error occurred while creating the file. The directory may
be write-protected or the drive may be full. Make sure there is
room for the file and you are able to create files in that loca-
tion.
Error finding character
The specified character’s bitmap could not be found. Contact
PSC Technical Support for assistance.
Error locating bitmap file
The file containing bitmaps for the selected language cannot
be found. Reinstall PPG to restore all files. If the message
persists, you may be running an outdated version of PPG-
Comp. Contact PSC Technical Support for assistance.
Error opening <source file
name>
Error <source file name> is empty
Error Message Description
2342.book Page 175 Thursday, July 22, 2004 8:35 AM