Filter
Top Products
Creating New Nodes
User’s Guide 59
Figure 35. Input Node: Track Size Tab
Display Tab
The Echo to Display option determines whether the received data is displayed
on the portable’s screen.
Figure 36. Input Node: Display Tab
When this option is selected, you are prompted to specify how and where data
is displayed.
You can select either the current cursor location or a specific posi-
tion. Selecting the current cursor position may cause the data display to vary.
Selecting a screen position allows you to specify an exact starting position.
The
clearing option allows you to further control the display. To remove exist-
ing data from the line on which the input data is displayed, select either
To
end-of-line
or Count. Select the appropriate option for the data you expect to
receive.
The echoed input is left on the screen until you display something else.
An Input Size register is predefined for your convenience.
The default settings (0 for both row and column) start the display in the top-left cor-
ner of the screen. The rows and columns are numbered starting with 0; the first row
is
0, the second is 1, and so on. Specify rows 0 through 5 and columns 0 through
15 on a PT40.
2342.book Page 59 Thursday, July 22, 2004 8:35 AM