Filter
Top Products
Alternate Parameters
User’s Guide 165
Alternate Parameters
Enter these commands by scanning the bar codes with the PT40’s laser or
through the PC’s serial port. You can also embed these codes in a PPG applica-
tion.
The Falcon PT40 recognizes the bar code commands in
Table 4 on page 165.
Table 4. Scannable Bar Codes of Alternate Settings for the PT40
Scannable Bar Codes of Alternate Settings for the PT40
Setting Name Bar Code Description
Clear Mode
Has the same effect as the
<CLR> key
Character
Clear Mode
Has the same effect as the
<CLR> key for the last
character entered.
Receive File
Mode
Prepares the portable to accept a program.
Low Beep
Mode
Sounds a low beep on the portable.
High Beep
Mode
Sounds a high beep on the portable.
Retrieve Data
Mode
Retrieves data if the application program stops
execution and gives the
PROGRAM FAILED
message. Connect the portable to the PC and start
the communications program on the PC, then scan
this bar code. The data will transmit, one file at a
time.
*--*
*-+*
*/.*
*.-*
*.+*
*$$*
2342.book Page 165 Thursday, July 22, 2004 8:35 AM