Filter
Top Products
Example Frames
150 PT Program Generator (PPG) v5.0
Location
Asset #
Date
Time
Example data:
Room 1,12345,2/24/2003,13:39:53
Room 1,12346,2/24/2003,13:39:58
Room 2,12347,2/24/2003,13:45:33
Room 2,12348,2/24/2003,13:39:43
If duplicate Asset #'s are to be disallowed, the Asset # must be looked up in
the second field and, if found, display a message and disallow the entry. Enter
“12347” at the
Asset # prompt and store it in the Default Register field
Asset #, copy Asset # to the Lookup register, insert “~,” on the front of the
entry and append “
,*” onto the end of the entry so the result is:
~,12347,*
Use the Lookup register in a Verify node as the comparison type against the
Default File to determine the existence of a duplicate record.
To search for a data in a file, complete the following steps:
1. Input
Asset # into Default Register Asset # field
2. Copy the
Default Register Asset # field to the Lookup register
3. Copy insert “
~,” onto the front of the Lookup register
4. Copy append“
,*” to the Lookup register
5. In the
Verify node, Verify Information tab, select File as the Data
Type
and File as the File = Default File type.
6. In the
Verify node, Verify Options tab, select ASCII as the Data type,
Register as the
Comparison type, and Lookup as the Register
type.
2342.book Page 150 Thursday, July 22, 2004 8:35 AM