Filter
Top Products
Example Frames
136 PT Program Generator (PPG) v5.0
Setting the Date and Time
All PSC portables include a clock that keeps track of the current date and
time. To allow users to adjust the date and time settings, complete the follow-
ing steps:
1. Create a new
Output node.
2. Set the
Output Destination to System.
3. Select Constant as the
Data Source.
4. Enter this command as the constant:
• To set the
time: %-;
• To set the
date: %.
•
Example: %-% displays the old time or date.
5. Enter the new time or date; if the time or date is correct press
<ENTER>
.
Changing the Auto-Off Timeout
By default, the PSC portable powers off automatically after ten minutes of
inactivity. To change this setting, complete the following steps:
1. Create a new
Output node.
2. Set the
Output Destination to System.
3. Select Constant as the
Data Source.
4. Enter this command as the constant: $+$-B2nnEE where nn = the
number of minutes of inactivity.
•
Example: $+$-B205EE sets the Auto-off timeout at 5 minutes.
2342.book Page 136 Thursday, July 22, 2004 8:35 AM